Mixing Ratio (by volume) : Full Gloss: 1 Part 5605/FG Part A + 1 Part 5747 or 5780 Part B (1A:1B) or 2 Parts 5605/FG Part A + 1 Part 5757 or 5776 or 5784 or 5789 (2A:1B) Refer to Technical Data Sheet.
Pot Life : 2 hours Pot life varies significantly with ambient temperature, humidity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job.
Thinning : Thin 20-40% with MIROSOL 1217 (Fast), 1263 (Medium), 1266, 1218, 1260 (Slow). In order to maintain consistency of colour during a job or repeat jobs of the same colour, it is critical to use the same Part B Hardener and thinner throughout.
Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi).
Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max.
Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi).
Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi).
Curtain Coater - Viscosity 40 – 50 seconds. Consult your local representative for further information.