MIROTHANE PU 5600 White Undercoat

Code: 5600

Universal, rapid dry pigmented undercoat that is easy to sand. Compatibility with MIROTHANE PU 5650 topcoat enables users to add excess topcoat into MIROTHANE PU 5600 to produce a tinted undercoat.

Features

Features

  • High build enhances the finished appearance of the topcoat
  • Easy to sand, results in minimal sanding time
  • Use up left over MIROTHANE PU 5650 topcoat by adding it to MIROTHANE PU 5600 undercoat to create your own tinted undercoat
  • Maybe topcoated with MIROTHANE PU polyurethane and MIROBILD AC acid catalysed topcoats

Specifications

Specifications

Colour : White
Build : Good
Sandability : Excellent
Vertical Hold Up : Good
Solvent Resistance : Excellent
Water Resistance : Excellent
Levelling & Flow : Good
Sink Back : Minimal
Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated
Dry Time : Refer to Technical Data Sheet
Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner

 

Tech Data Sheet

Application

Application

Mixing Ratio (by volume) : 2 Parts 5600 Part A + 1 Part 5747 Part B (2A:1B) or 4 Parts 5600 Part A + 1 Part 5715, 5728, 5735 or 5757 (4 A:1B)
Pot Life : 1-2 hours at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job.
Thinning : Thin up to 50% with MIROSOL 1217 (Fast), 1263 (Medium), 1266 (Slow)

 

Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi).
Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max.
Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi).
Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi).

 

Where to Use

Where to Use

Interior use. Doors, kitchen & bathroom cabinets, commercial joinery and wall panelling and domestic furniture.

To top