MIROSTRIP 1019 Paint Stripper

Code: 1019

General purpose paint stripper suitable for stripping most types of paint from timber and metal surfaces.

Features

Features

  • Ready for use
  • Apply by brush

Specifications

Specifications

Clean Up : Clean all equipment using MIROSOL 1228 or 1231. Metal surfaces may be hosed down with a high pressure water jet wash.
 

Tech Data Sheet

Tech Data Sheet

Data Sheet

Safety Data Sheets

Mirotone Warranty Information

Application

Application

Apply a thick film by brush. Allow to stand for 3 to 5 minutes (most paints will bubbles and wrinkle). Remove with a wide metal scraper.

MIROSTRIP may be left longer (10-30 minutes) for more difficult to remove paints. Sanding the surface prior to application of MIROSTRIP 1019 with 180 grit sandpaper can help the stripper to penetrate the coating.

Ensure that all MIROSTRIP 1019 is thoroughly removed before coatings (sand with 180-240 grit sandpaper to remove residue).

Where to Use

Where to Use

Removes most type of paint; nitrocellulose, precatalysed lacquers, alkyd paints, acid catalysed and polyurethane coatings.

To top