Thinning : MIROSTAIN 2013 is supplied ready for use (RFU). However to achieve lighter tones reduce with MIROSOL 1220 (Fast), MIROSOL 1294 (Medium) or 1242 or 1218, 1260 (Slow) thinners.
Toning : If required, to provide extra depth of colour, add up to 10% by volume to MIROCAT PC or MIROBILD AC coatings. Apply in light even coats over sealed timber to obtain depth of colour.
Pad or Rag - Use a clean lint free cloth, apply in even strokes.
Suction Gun - Use 1.5mm (59 thou) orifice with 280kpa (35 psi). It is important not to apply MIROSTAIN above this pressure to avoid dark or blotchy discolouration.
Pressure Pot - Use 1mm orifice with pressure pot air-cap. Gun pressure 280kpa (35 psi) and a pot pressure of 16kpa (2 psi) max.
Airless Spray - Contact Mirotone’s Technical department.
Air Mix Guns - Contact Mirotone’s Technical department.