MIROSHIELD 3900 UV Absorber Additive

Code: 3900

UV Absorber Additive for solvent based clear coatings. Contains a sophisticated package of UV absorbers and light stabilisers that have proven highly effective in protecting reconstituted, dyed and natural wood veneers from colour change.

Features

Features

  • Excellent UV blocker, minimises colour shift of sensitive substrates when exposed  to UV light  and improves coating durability
  • Universal, may be added to MIROCAT PC, MIROBILD AC and MIROTHANE PU coatings
  • Easy to use, simply add the correct amount to the desired coating

Tech Data Sheet

Application

Application

To maximise UV protection of the substrate it is essential that MIROSHIELD 3900 is added to all the layers in the coating system, including isolators, sealers and topcoats.

Addition to Single Pack Products - Add MIROSHIELD 3900 UV Absorber Additive into the single pack of the selected clear coating and mix thoroughly. Thin as required, mix thoroughly and then apply per directions on the appropriate product Data Sheet. Apply in even wet coats to achieve a uniform finish.

Addition to Two Pack Products: Mix Part A and Part B per relevant Data Sheet and mix thoroughly. Then add MIROSHIELD 3900 UV Absorber Additive per the table above. Thin as required, mix thoroughly and then apply as per directions on the appropriate product Data Sheet. Apply in even wet coats to achieve a uniform finish. Note: The addition of MIROSHIELD 3900 UV Absorber will reduce the viscosity and this will need to be considered before thinning further.

Where to Use

Where to Use

Interior use. Ideal for reconstituted, dyed and natural wood veneers when protection from UV light is required.

Semi exterior applications e.g. covered entry doors and internal faces of opening windows. Refer to Technical Data Sheet for further information

To top