MIROPOL PE 5120 White Undercoat

• Easy to sand, will powder easily ensuring quick sanding
• Excellent vertical hold up
• Excellent flow and levelling results in high distinction of image (DOI) when topcoated with a full gloss polyurethane topcoat
• Excellent build, it will enhance the finished appearance of the topcoat by filling and covering the fibres if the substrate

Colour : White
Specific Gravity : 1.45+/-0.05
Build : Excellent
Sandability : Excellent
Vertical Hold Up : Excellent
Solvent Resistance : Very Good
Water Resistance : Very Good
Levelling & Flow : Excellent
Sink Back : Minimal
Coverage : 3m2 per litre at 300 micron film build. This is dependent on the application equipment / gun set up and the article be coated
Drying : Refer to Technical Data Sheet
Clean Up : Clean all equipment using MIROSOL 1208 or 1234 Thinner
 

Data Sheet

Safety Data Sheets

Mirotone Warranty Information

Mixing Ratio : Mix by volume, 1 Litre 5120 Part A + 20ml 5202 Accelerator + 10ml Peroxide (MEKP Catalyst) (100:2:1). Mixing the Accelerator and the Peroxide Hardener together may cause an explosion or fire.
Pot Life : Approximately 45 minutes at 25°C. Pot life varies significantly with ambient temperature and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job.
Thinning : Up to 30% with MIROSOL 1208, 1234 or 1224 Thinner.
 

Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi).
Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max.
Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi).
Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi).

Interior use only. Interior doors, kitchen & bathroom cabinets, commercial joinery and wall panelling and domestic furniture.