MIROCAT PC 3242 Clear Sealer

Code: 3242

A universal sealer for MDF, solid wood and veneer. It has been specifically formulated to supress wax extraction in MDF. Superior build means that the number of coats can be kept to a minimum. Fast dry and excellent free sanding mean reduced down time between coats.

Features

Features

  • High build provides improved hold up and reduces the number of coats required
  • Easy to use, achieve an excellent finish with minimal effort
  • Isolate waxes in medium density fibreboard (MDF) reducing wax extraction
  • Fast drying allows early sanding which minimises production time
  • May be tinted to a black undercoat

Specifications

Specifications

Colour : Turbid in can, dries clear
Build : High
Sandability : Excellent
Vertical Hold Up : Very Good
Solvent Resistance : Good
Water Resistance : Good
Levelling & Flow : Excellent
Sink Back : Minimal
Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated.
Dry Time : Refer to Technical Data Sheet
Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner

 

Tech Data Sheet

Application

Application

Thinning : Thin 10-20% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow).
 

Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi).
Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max.
Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi).
Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi).

Where to Use

Where to Use

Interior use only. Ideal for domestic furniture, children’s toys and furniture, picture frames, musical instruments, joinery and antique restoration.

To top